Q. My Aeropro spray gun pattern is not even and seems to be heavier in certain spots. What can I do to prevent this?

A. First thanks for you use our Aeropro Spray Gun,The first thing you should do is check to see if the problem is caused by the air cap or fluid tip. Follow this simple rule. Give the air cap a half turn. If you notice the heavier spot on the pattern moving in sync with your turn then your air cap needs to be cleaned or replaced. If your pattern does not change then your fluid tip needs cleaning and should be checked for wear and/or replaced.you can send email to aeropro air tools: sales02@aeroprotools.com,86-576-82448401