Painting large commercial spaces like warehouses, factories, and office buildings requires heavy-duty equipment that can handle large volumes of paint efficiently. Consumer-grade paint sprayers are often not durable enough for heavy commercial use. Professional paint sprayers are a must for commercial users looking to save time and labor costs on big jobs.
Benefits of Commercial Paint Sprayers
Increased Productivity: Commercial paint sprayers can be up to 3x faster than traditional brush and roller application. Their high pressure delivery allows painters to quickly coat large areas, resulting in higher daily productivity. This time savings really adds up for massive commercial painting projects.
Better Coverage: Professional sprayers distribute paint evenly and reach areas that are difficult to access with brushes. They provide consistent, smooth coverage on walls, ceilings, doors, railings - you name it. The high pressure atomizes the paint into a fine mist that lays down a uniform coat.
Less Overspray: Commercial sprayers are highly adjustable when it comes to fan speed, flow rate, and spray patterns. This allows painters to dial in the settings to minimize overspray and waste. Newer models feature advanced technology that greatly improves paint atomization for less overspray.
Easy Maintenance: Professional paint sprayers are designed for high volume, frequent use. They have durable parts that can be easily cleaned and maintained for long equipment life. Many have tip, hose and filter systems that can be quickly serviced to keep the sprayer in top working condition.
How to Use a Professional Paint Sprayer
Priming and Paint Selection
Begin by applying a high-quality primer to the entire surface. The primer will provide a uniform base for the paint to adhere to. For best results, use a primer made by the same manufacturer as the paint. When selecting paint for commercial spraying, look for industrial-grade acrylic or epoxy paints designed to withstand heavy use and scrubbing. Avoid cheap paints which can clog sprayer hoses, purchase paint in the same sheen; mixing sheens results in blotchy, uneven coverage.
Setting up the Sprayer
Prepare the paint sprayer according to the manufacturer's instructions. Carefully attach the hose, prime the pump, and clean out any residues from previous jobs. Select a spray tip sized for the type of coating you're applying; smaller tips work best for thinner paints. Adjust the pressure high enough to fully atomize the paint. Thin the paint slightly with water or solvent if it's too thick. Pour paint into the supply bucket, insert the suction tube, and run water through the system to check for leaks before filling with paint.
Applying the Paint
When spraying, hold the gun perpendicular to the surface at a consistent distance - usually 8 to 14 inches. Apply a light tack coat first, then build up to a full wet coat. Overlap edges slightly while maintaining smooth strokes. Avoid letting paint build up too thick in one area. If drips or runs occur, use a brush to smooth them out quickly. Always maintain a wet edge when spraying large sections. For cutting in edges and tight areas, use a smaller spray pattern or angle the gun accordingly. Maintain constant pressure and speed as you spray. Work methodically section by section until the entire surface is coated.
With the right spray equipment, you can take on bigger jobs and grow your business. The AEROPRO 990 Top Commercial Airless Paint Sprayer is designed for high volume, frequent use. This ultra-high pressure sprayer can blast out up to 3.5L per minute while operating up to 3300 PSI, allowing it to spray high viscosity coatings with ease.
Polyurethane cover permits greater flexibility and tighter bends. Will not swell or degrade in contact with most paint chemicals, oils and most other solvents. Light weight-approximately half that of comparable rubber or wire hose. O.D smaller than comparable rubber hose without reducing the I.D., pressure rating, or fluid-carrying capacity.
Suitable for home improvement,furniture factory,spraying industry and so on.
Voltage/Frequency:220V/50Hz
Standard Nozzle Size:517(0.017")
Max.Pressure For The Hose: 3300Psi, 22.7Mpa
Net Weight: 31kgs(68.2Lbs)
Motor Power: 2HP,1400W
Max Pressure: 2700 Psi, 18.6Mpa
Length Of High Pressure Hose: 15M
Flow Rate:3.5L/Min
AEROPRO has quickly risen to become an unrivaled global producer of air-powered devices including air tools, air spray gun, air nailer, airless paint sprayer, and etc.
AEROPRO seeks independent sales agent to represent and market our industry-leading pneumatic tools. We support OEM, ODM, OBM customization, small order quantity is acceptable and samples are available.
Make any cooperation possible. Any services related to the product, inquire with us now! Sales@Aeroprotools.Com