Home / all news & press /

How To Make Air Spray Gun More Comfortable To Use

date
2024/01/25



Using an air spray gun for extended periods can lead to fatigue and discomfort if not used properly. However, there are several advancements and tips that can help make air spray gun use more comfortable.

 

Choose an Ergonomic Spray Gun Design

 

The design and shape of the spray gun itself plays a big role in comfort. Look for spray guns with the following features:

 

Lightweight materials like aluminum or composite polymers to reduce hand and arm fatigue

 

Rubberized grip areas to prevent slipping and improve comfort

 

Adjustable handles that can fit different hand sizes  

 

Balanced design so the gun doesn't feel too front or back heavy

 

Fatigue-reducing trigger designs requiring less force to press

 

Selecting an ergonomically designed spray gun tailored to the user's hand size and task can go a long way in promoting comfortable extended use.

 

Use an Air Pressure Regulator

 

Fluctuating high pressure from the air compressor can make the spray gun kickback or be difficult to control. Using an air pressure regulator allows you to dial in and maintain an optimal air pressure for the specific coating and task. This gives the spray gun a consistent spray pattern and predictable feel, reducing fatigue from constantly fighting varying air pressures.

 

With adjustable air, you can turn it down for improved control on detail work. This gives you an easier, more comfortable trigger pull. Install the valve as close to your gun as possible for optimal response.

 

Use a Flexible Air Supply Hose

 

Upgrade your setup with a flexible air hose like rubber or polyurethane. Rigid hoses are fatiguing because they pull against your movements. Flexible hoses eliminate this tension so you can move freely without fighting the hose. Keep the diameter at least 1/4" and under 50 feet long.

 

Adjust The Nozzle Properly

 

Having the spray nozzle adjusted appropriately for your height and arm length is key for comfort. You don't want to be straining your wrist to maneuver a nozzle that is set too low or too far away. Adjust the nozzle so it points naturally with your arm in a neutral, relaxed position. Mark the sweet spot if needed so you can easily return to it. This helps prevent fatigue from improper nozzle positioning.

 

Use Proper Stance and Motion

 

How you hold and move the spray gun also impacts comfort. Avoid "death gripping" the spray gun which causes tension and fatigue. Instead, use a relaxed grip with your fingers curled naturally around the handle. Support the weight of the gun by cradling it in your palm rather than just pinching with fingers. Keep wrists straight to align with your forearm.

 

Avoid hunching over or using static postures. Keep your elbows bent at your side, feet shoulder-width apart, and spine aligned. Move your entire body on your feet to reposition the gun, rather than twisting from your waist.

 

Also, engage your shoulder, arm, wrist, and fingers to divide the work over multiple joints. Switch between left and right hands periodically if possible. Keep motions fluid using your entire arm rather than only tiny wrist flicks. Proper stance and motion protects from fatigue and strains that can set in from overworking specific muscles.

 


Not all air spray guns are designed equally when it comes to comfort. The AEROPRO A608 High Efficiency Spray Gun was purpose-built for professionals who aim for perfection in every coating application.

 

The ergonomic handle lessens user fatigue for comfort during high-volume jobs. Easy cleaning, it’s made of hard anodized aluminium and can be disassembled and cleaned separately. Lighter weight, painters will get a sense of more control and experience less fatigue during work.

 

It comes with an air pressure regulator, high precision, easy voltage regulation, stable output. The desired pattern, volume of fluid output and fine atomization can easily be obtained by regulating the pattern adjusting knob, fluid adjusting knob and air adjusting knob.

 

Great for Automobile finish painting, optimized stainless steel nozzle design for various spray distances and inlet pressure.

 

Type of Feed: Gravity

Standard Nozzle:1.3mm

Recommended air pressure: 2.0bar(29psi)

Recommended spraying distance: 200mm

Pattern Width:Width:50-70mm,length:260-320mm

Paint Capacity:600cc

Air Inlet:1/4''

Max.temperature of the spray medium:50℃


AEROPRO has quickly risen to become an unrivaled global producer of air-powered devices including air tools, air spray gunair nailer, airless paint sprayer, and etc.

AEROPRO seeks independent sales agent to represent and market our industry-leading pneumatic tools. We support OEM, ODM, OBM customization, small order quantity is acceptable and samples are available.

Make any cooperation possible. Any services related to the product, inquire with us now! Sales@Aeroprotools.Com